Nightglowe Interior Ambient Lighting Kit

The Nightglowe Interior Ambient Lighting Kit wraps your entire cabin in customizable RGBIC light, doors, dashboard, footwells, and handles, with the kind of layered glow you would expect from a luxury build, not an aftermarket kit.

Fits Any Vehicle

Universal fit. Works on any car, any make, any model. There is no vehicle-specific version. The strips are flexible and route behind your factory panels, so they adapt to any interior. No drilling, no cutting, no permanent modifications.

How to Choose: 14 vs 18 vs 22-in-1

The number tells you how many light pieces you get. Every kit includes the same 6 core lighting strips, so dashboard, door, and footwell coverage is identical across all three. The higher tiers simply add more accent lights.

• 14-in-1 (from $129.99): 6 core strips + 4 footlights + 4 door bowl lights
• 18-in-1 (from $139.99): everything in 14-in-1 + 4 storage compartment lights
• 22-in-1 (Best Value) (from $159.99): everything in 18-in-1 + 4 speaker ambient lights

The 6 Core Strips (included in every kit)

• 1x Dashboard strip, 110cm
• 1x Dashboard strip, 20cm
• 4x Door strips, 90cm each

The two dashboard strips give you 130cm (about 51 inches) of continuous dash coverage, enough to span the full width of virtually any dashboard, steering side to passenger side, without gaps.

Add-On Accent Lights by Tier

• Footlights (x4): included in 14, 18, and 22-in-1
• Door bowl lights (x4): included in 14, 18, and 22-in-1
• Storage compartment lights (x4): included in 18 and 22-in-1
• Speaker ambient lights (x4): included in 22-in-1 only

What Makes It Different

• RGBIC technology: Color zones run independently. Richer, more dynamic effects than standard RGB.
• App + music sync: Control colors, brightness, and scenes from your phone with the LED LAMP app, on iOS and Android. Reacts to music in real time.
• Acrylic optical fiber construction: Brighter, more uniform light diffusion than strip-only kits.
• Zero permanent modifications: No drilling, no cutting. Fits behind factory panels.
• Master + sub-controller system: One app controls all zones in sync.

What Is Included

• Lighting pieces (14, 18, or 22 based on selection)
• 1 master controller + 4 sub-controllers
• App control via LED LAMP (iOS + Android)
• Full installation guide

Electrical Specs (12V)

• Peak power: 14 watts total
• Recommended fuse: 2 amp

Power and Battery Safety

• Wire it to a switched 12V source. This is our recommended installation method. On a switched, or ACC, feed the system powers up with the car and shuts down with it, so nothing is left connected to your battery while the car is parked.
• A permanently live feed is a tradeoff, not a mistake. Some owners wire to a constant 12V source on purpose, so they can switch the lights from their phone without the ignition on. What you give up is that the controllers stay connected to the battery the whole time the car is parked, and that counts against the 50 mA parked car budget below. On a car driven most days that is usually a fair trade. On a car that sits for long stretches, or one with a battery that is already marginal, use a switched source. If you want the phone control without the constant connection, run the feed from an ignition switched fuse in the dash fuse box, or use a relay with the coil triggered by ACC.
• The budget you are working inside is about 50 mA. That is the accepted figure for everything still drawing on a parked car, across the whole vehicle, shared with your car's own modules. It is why the feed you choose matters more than the kit itself.
• Use the fuse rating above. Fitting a larger fuse to stop one blowing removes the protection you fitted it for.
• To check your own car. Put a multimeter in series with the negative battery terminal, lock the car, and wait 30 to 40 minutes for the vehicle's own modules to go to sleep before you read it. Compare that with the kit unplugged. The difference is the kit.
• Adding more lights later. Each sub-controller has four ports and a standard kit uses all four. To add more lighting, add another sub-controller rather than loading a full one, which dims the lights already connected to it. The controllers stay in sync over Bluetooth however many you run.
• This does not affect your warranty. Hardwiring to a switched 12V accessory source is our recommended method and is not an exclusion. Incorrect wiring, and improper power or ground connections, are.

Fitment FAQ

• Will it fit my car? Yes. The kit is universal and fits any make or model.
• Do I need a version for my specific vehicle? No. There is one kit and it adapts to any interior.
• Will the dashboard strip cover my full dash? Yes. 130cm of dash strip spans the full width of nearly any vehicle.

Free shipping. No permanent modifications required. Questions? We respond within 24 hours.